Home
>> Products
>> Yaskawa
>> Servo driver / motor
>> SGDV type
>> SGMGV type motor
>> SGMGV-1AA3C2S Rotary servo motor
SGMGV-1AA3C2S Rotary servo motor
Yaskawa SGMGV-1AA3C2S Manual And Instructions
SGMGV-1AA3C2S Setup Rotational MotorProduct Manual
Yaskawa SGMGV-1AA3C2S Product information and technical parameters：
Brand: Yaskawa
Name: Rotary servo motor
Model: SGMGV-1AA3C2S
Sigma -V series servo motor SGMGV.
Rated output: 11kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
...More relevant models >>>>
SGMGV-1AA3C2S Setup Rotational MotorProduct Manual
Yaskawa SGMGV-1AA3C2S Product information and technical parameters：
Brand: Yaskawa
Name: Rotary servo motor
Model: SGMGV-1AA3C2S
Sigma -V series servo motor SGMGV.
Rated output: 11kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: Standard (bolt for silver).
Shaft end: straight shaft, without keyway (standard).
Optional: with oil seal.
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation
Large capacity SGMVV type servo motor.
Rated output: 22KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (without keyway and screw).
Optional parts: with hold brake (DC90V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties SGMGV-1AA3C2S SGMGV-1AA3C2S
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenDC power input servo unit type SGDV SGMGV-1AA3C2S.
Maximum applicable motor capacity: 30W.
Power supply voltage: DC48V.
Hardware specification: dynamic brake (DB). Interface: pulse sequence instruction (rotary servo motor).
Design sequence: A.
Pursuit of light weight.
The compact and light weight of the driver can be effectively used in a limited space, and the space of the control cabinet and the device can be used as a contribution SGMGV-1AA3C2S.
Using DC power input.
Servo can use battery driven, small size, superior performance,
Can further improve the clean room robot, AGV (unmanned vehicle), such as the level of battery driven transport system.
In addition, the control power supply and the main circuit power supply are independent of the power supply system,
The main circuit power supply can be cut off only when an alarm occurs, and the fault diagnosis can be easily carried out.
Main circuit power supply can use DC24V and DC48V power supply.
When using DC48V power supply, can further improve the motor speed characteristics"
Control power is only DC24V. The improvement of the characteristic is different from the motor. For more details, please refer to the "torque speed characteristics" of the combined motor.
With the latest technology to pursue high performance and ease of use
Using the new advanced automatic tuning function, can be in a short period of time too the user system for the best setting SGMGV-1AA3C2S.
The model tracking control and vibration suppression of the shaking of the device is provided with a shortened positioning time,
The ability of anti load fluctuation to compensate the friction coompensation,
The most suitable for the device to start operation and load fluctuations in the various uses of the new type of non functional adjustment SGMGV-1AA3C2S.
Rated output: 22KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit delta.
Rated speed: 1500r\/min.
The main mechanical structure: flange type, straight shaft (without keyway and screw).
Optional parts: with hold brake (DC90V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength of the mechanical properties SGMGV-1AA3C2S SGMGV-1AA3C2S
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusted, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happenDC power input servo unit type SGDV SGMGV-1AA3C2S.
Maximum applicable motor capacity: 30W.
Power supply voltage: DC48V.
Hardware specification: dynamic brake (DB). Interface: pulse sequence instruction (rotary servo motor).
Design sequence: A.
Pursuit of light weight.
The compact and light weight of the driver can be effectively used in a limited space, and the space of the control cabinet and the device can be used as a contribution SGMGV-1AA3C2S.
Using DC power input.
Servo can use battery driven, small size, superior performance,
Can further improve the clean room robot, AGV (unmanned vehicle), such as the level of battery driven transport system.
In addition, the control power supply and the main circuit power supply are independent of the power supply system,
The main circuit power supply can be cut off only when an alarm occurs, and the fault diagnosis can be easily carried out.
Main circuit power supply can use DC24V and DC48V power supply.
When using DC48V power supply, can further improve the motor speed characteristics"
Control power is only DC24V. The improvement of the characteristic is different from the motor. For more details, please refer to the "torque speed characteristics" of the combined motor.
With the latest technology to pursue high performance and ease of use
Using the new advanced automatic tuning function, can be in a short period of time too the user system for the best setting SGMGV-1AA3C2S.
The model tracking control and vibration suppression of the shaking of the device is provided with a shortened positioning time,
The ability of anti load fluctuation to compensate the friction coompensation,
The most suitable for the device to start operation and load fluctuations in the various uses of the new type of non functional adjustment SGMGV-1AA3C2S.
...More relevant models >>>>
Last one: Yaskawa Rotary servo motor SGMGV-75A3C2S
next one: Yaskawa Rotary servo motor SGMGV-1EA3C2S
Related download