YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> SGMAV-01ADA6S Command Manual (Setup Rotational Motor)

SGMAV-01ADA6S Command Manual (Setup Rotational Motor)

Brand: Yaskawa
Product model: SGMAV-01ADA6S
Name: Direct-connect Cable
Sort: Command Manual (Setup Rotational Motor)
File language: English
File size: 8.38MB
Sigma -V series servo motor SGMSV.
Rated output: 4.0kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with hold brake (DC90V).
Super power rate.
Variety is complete (1.0kW ~ 7.0kW, with hold brake) SGMAV-01ADA6S Command Manual.
Equipped with a high resolution serial encoder (20 bit) SGMAV-01ADA6S
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type SGMAV-01ADA6S Command Manual.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationHigh performance, use the best type of servo unit (high performance) SGMAV-01ADA6S Command Manual.
Maximum applicable motor capacity: 0.75kw.
Power supply voltage: three phase AC200V.
Design sequence: A.
Hardware specifications: paint.
Interface: MECHATROLINK-III communication command type (rotary servo motor).
Function: no deviation standard.
High performance sigma shaped -V-EX series.
2 models of high performance servo unit.
EX001 (support M- III high speed communication): the communication cycle is the minimum value of 125 s, which makes the response of the instruction becomes faster, and the track accuracy and processing ability are improved.
EX002 (no deviation of the specification): greatly improve the command tracking performance, and further improve the accuracy of trajectory control. Large capacity SGMVV type servo motor.
Rated output: 37KW.
Voltage: three phase AC400V.
Serial encoder: 20 bit absolute value type.
Rated speed: 800r\/min.
The main mechanical structure: support mounting type, straight shaft (with keyway and screw).
Optional parts: with hold brake (DC24V), with oil seal.
The use of small, low inertia servo motor, also can give full play to the strength oof the mechanical properties SGMAV-01ADA6S Manual.
The new model SGMVV with a rated output of 22~55KW, the amount of passenger speed 800r\/min and 1500r\/min products.
After the motor is installed, the phase is started to run immediately.
Even if the servo is not adjusteed, as long as the moment of inertia is within the allowable range,
Even if the load changes, it can be driven stably, and the vibration will not happen
Related products
Yaskawa
Ultra low inertia servo motor
SGMAV-04ADABC
Yaskawa Ultra low inertia servo motor SGMAV-04ADABC
Sigma -V series servo motor SGMAV. Rated outp
Yaskawa
Ultra low inertia servo motor
SGMAV-02A3A2E
Yaskawa Ultra low inertia servo motor SGMAV-02A3A2E
Sigma -V series servo motor SGMAV. Rated outp
Yaskawa
Ultra low inertia servo motor
SGMAV-04ADA6S
Yaskawa Ultra low inertia servo motor SGMAV-04ADA6S
Sigma -V series servo motor SGMAV. Rated outp
Yaskawa
Ultra low inertia servo motor
SGMAV-06ADA6C
Yaskawa Ultra low inertia servo motor SGMAV-06ADA6C
Sigma -V series servo motor SGMAV. Rated outp