SGMGV-1ADDA2C USER'S MANUAL (Setup Rotational Motor)

DC power input servo unit type SGDV.
Maximum applicable motor capacity: 11W.
Power supply voltage: DC48V.
Hardware specification: dynamic brake (DB). Interface: pulse sequence instruction (rotary servo motor).
Design sequence: B.
Pursuit of light weight.
The compact and light weight of the driver can be effectively used in a limited space, and the space of the control cabinet and the device can be used as a contribution SGMGV-1ADDA2C USER'S MANUAL SGMGV-1ADDA2C
Using DC power input.
Servo can use battery driven, small size, superior performance,
Can further improve the clean room robot, AGV (unmanned vehicle), such as the level of battery driven transport system.
In addition, the control power supply and the main circuit power supply are independent of the power supply system,
The main circuit power supply can be cut off only when an alarm occurs, and the fault diagnosis can be easily carried out SGMGV-1ADDA2C USER'S MANUAL.
Main circuit power supply can use DC24V and DC48V power supply.
When using DC48V power supply, can further improve the motor speed characteristics"
Control power is only DC24V. The improvement of the characteristic is different from the motor SGMGV-1ADDA2C USER'S MANUAL. For more details, please refer to the "torque speed characteristics" of the combined motor.
With the latest technology to pursue high performance and ease of use
Using the new advanced automatic tuning function, can be in a short period of time to the user system for the best setting.
The model tracking control and vibration suppression of the shaking of the device is provided with a shortened positioning time,
The ability of anti load fluctuation to compensate the friction compensation,
The most suitable for the device to start operation and load fluctuations in the various uses of the new type of non functional adjustment.Sigma -V series servo motor SGMGV.
Rated output: 5.5kw.
Power supply voltage: AC400V.
Serial encoder: 20 bit Delta (standard).
Design sequence: standard.
Shaft end: straight shaft with keyway, with screw (optional).
Optional: with oil seal, with the brake (DC24V).
A variety of mechanical feed shaft drive (high speed feed).
Variety is complete (300W ~ 15kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67.
Use example:
Machine tool。
Transport machinery.
Handling machinery。
Food processing machinery.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat ressistance grade: F SGMGV-1ADDA2C Manual.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80%% (not dew) SGMGV-1ADDA2C Manual.
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotation