YASKAWA
Home >> Download >> Yaskawa >> Manual Download >> SGDV-131JE1A001 USER'S MANUAL (For Use with Large-Capacity Models Setup)

SGDV-131JE1A001 USER'S MANUAL (For Use with Large-Capacity Models Setup)

Brand: Yaskawa
Product model: SGDV-131JE1A001
Name: AC Servo Drives
Sort: USER'S MANUAL (For Use with Large-Capacity Models Setup)
File language: English
File size: 9.55MB
Servo motor SGMSH type.
Rated speed: 3000r\/min.
Power: 4.0kw.
Power supply voltage: three phase AC200V.
Serial encoder: 17 bit relative value.
Design sequence: A.
Shaft end: taper 1\/10, with parallel key.
Optional parts: with DC90V brake.
Ultra high power response series: the need for small inertia, high torque SGDV-131JE1A001 USER'S MANUAL.
Online automatic adjustment, automatic measurement of mechanical properties, set the required servo gain SGDV-131JE1A001
Even if the initial contact, can also be completed in a short time the best set.
Automatic identification of the motor, servo drive automatic identification of servo motor power, specifications, automatic setting motor parameters.
Standard for regenerative resistance connection terminals SGDV-131JE1A001 USER'S MANUAL.
Connecting terminal equipped with external regenerative resistance,
Convenient connection regenerative resistorSigma -V series servo motor SGMSV.
Rated output: 1.5kw.
Power supply voltage: AC200V.
Serial encoder: 20 bit absolute value type (standard).
Design sequence: standard.
Shaft end: straight shaft, without keyway (standard).
Optional: with hold brake (DC90V).
Super power rate SGDV-131JE1A001 USER'S MANUAL.
Variety is complete (1.0kW ~ 7.0kW, with hold brake).
Equipped with a high resolution serial encoder (20 bit).
Standard using IP67 (7.0kw for IP22).
Use example:
Placement machine.
Punch printed circuit board.
Machine tool feeding device.
Rating and specifications:
Rated time: continuous.
Vibration level: V15.
Insulation resistance: DC500V, 10M, or above.
Using ambient temperature: 0 ~ 40 degrees C.
Excitation mode: permanent magnet type.
Installation method: flange type.
Heat resistance grade: F.
Insulation withstand voltage: AC1500V 1 minutes (200V), AC1800V 1 minutes (400V).
Protection mode: fully enclosed self cooling type IP67 (except shaft through part).
The use of environmental humidity: 20 ~ 80% (not dew).
Connection mode: direct connection.
Rotation direction: clockwise direction (CCW) rotation at the load side under the direction of rotationEquipped with INDEXER functional type servo unit (kit type).
Maximum applicable motor capacity: 0.2kw.
Power supply voltage: single phase AC100V.
Interface: instruction selection and installation (rotary type servo motor).
Matching (hardware): base mounting type (standard).
Matching (software): standard.
Matching (parameter): standard.
Optional modules: INDEXER module.
Simple.
By programming and serial programming, easy implementation of motion control.
Can also be installed through the Windows environment support tool (SigmaWin+) easy to start.
The I/O module can be connected with the upper controller simply.
Smart.
To support the operation of the main purpose of the positioning operation based on the program table.
The maximum number of programmable ppositioning points to 256 points SGDV-131JE1A001 Manual.
With external positioning, JOG speed table operation, the origin of reversion, rich features such as programmable signal output.
I/O points for the input: 19 points, output: 16 points.
Speedy. SGDV-131JE1A001 Manual.
High speed and high precision positioning by combining with high performance V series.
Motion control can be realized without using motion controller.
Related products
Yaskawa
Large capacity servo controller
SGDV-131JE1A
Yaskawa Large capacity servo controller SGDV-131JE1A
Large capacity servo unit. Maximum applicale
Yaskawa
Large capacity servo controller
SGDV-131J11A
Yaskawa Large capacity servo controller SGDV-131J11A
Large capacity servo unit. Maximum applicale
Yaskawa
Large capacity servo controller
SGDV-131J11B003
Yaskawa Large capacity servo controller SGDV-131J11B003
Large capacity servo unit. Maximum applicale
Yaskawa
Large capacity servo controller
SGDV-131J21B003
Yaskawa Large capacity servo controller SGDV-131J21B003
Large capacity servo unit. Maximum applicale